Celotex TB4000 45mm is like many inches

Celotex Technical Center: Introduction. Celotex TD provides a quick and easy way to achieve effective thermally insulated flat roof decks for. Celotex TD provides a quick and easy way to achieve effective thermally insulated flat roof decks for building structures such as small extensions or garage. mm Celotex TD provides a quick and easy way to achieve effective thermally insulated flat roof decks for building structures such as small extensions or.

Author:Zulkirg Nikozil
Country:Thailand
Language:English (Spanish)
Genre:Personal Growth
Published (Last):9 April 2012
Pages:478
PDF File Size:20.69 Mb
ePub File Size:17.16 Mb
ISBN:530-8-21528-369-6
Downloads:58966
Price:Free * [* Free Registration Required]
Uploader:Kagadal

Unfortunately, further to the recent supply challenges with PIR and Phenolic insulation boards from Celotex, Kingspan, Ecotherm and Recticel, available stock of these product will vary throughout the country.

We will endeavor to source the required stock, however, we may need to mix and match equivalent products from multiple manufactures, suppliers and depots.

This may affect the rates; we will of course discuss possible solutions with you before proceeding and will do our best to keep additional costs down. Specialized insulation boards will be affected more than general application boards, so please allow additional time to process and deliver these orders. Please allow extended lead times on PIR and Phenolic foam insulation. These boards offer a quick and easy way to achieve effective thermally insulated flat roof decks for building structures such as small extensions or garage roofs where there will only be occasional traffic.

Celotex TD Tempchek incorporates a foil faced insulation board, to give the best insulation value bonded to a facing of 5. Tempchek has a 5. Product Information and Certification Links to manufacturer’s information.

Click to download in a separate browser window. These boards for single-ply flat roofing applications where the higher compressive strength is a pre-prop. Ideal for built-up flat roofing applications, involving hot applied bituminous and mastic asphalt water-proofing systems. Therma Roof foil faced insulation for flat roofs with mechanically fixed single-ply waterproofing.

Glass tissue faced insulation for fully adhered single-ply, partially bonded built-up felt, mastic asphalt waterproofing.

Ensure that joist spacing is at no more than mm centers and that the dimension of the joist is sufficient to span and accept additional loads.

If asphalt weathering is to be used, joists should be at no more than mm centers. Install the insulation boards, ensuring that the long edges are parallel to the line of the joists. Where boards butt together, bed onto twin beads of vapor sealant wide enough to accommodate this arrangement.

Lay the boards with the plywood side uppermost and stagger board joints. Leave a gap of approximately 2mm between boards and ensure a minimum 20mm bearing on joists and noggings. Fix Celotex TD with corrosion-proof Suretwist Composite Panel helical fasteners at a frequency to suit the design wind load. As a guide, 16 fasteners per board will resist a wind load of 2. Ensure that fixings are no less than 10mm in from the board edge or 50mm from each corner.

They should be equally spaced along the supporting joists. Fixings should be long enough to penetrate at least 38mm into the supporting timber.

CELOTEX TD (Celotex Saint-Gobain) | Ingyenes BIM Objektum Revit rendszerekhez | BIMobject

Provide a complete insulation envelope by extending the wall insulation board up to the underside of the roof deck. Provide a soffit or ceiling below the joists, as the surface of the product is not designed to be used as a decorative internal finish.

When using celotrx single-ply membrane, additional 12mm plywood has to be applied on top of the Celotex TD Temporary protection must be provided for both the insulation and the waterproofing, if significant foot traffic is anticipated either during or after installation. The structure should be designed so that the finished roof has a continuous, smooth and even slope towards the rainwater outlet or gutter. The minimum fall should be 1: This gives the product excellent strength.

has anyone any experience in using Celotex TD4000

Boards can span up to mm joist centers to provide a suitable substrate for a variety of weathering systems. Celotex TD has a built-in VCL due to the foil facers but this is discontinuous at the board joints. In some applications no further attention to moisture control may be necessary. Celotex would generally recommend the application of a vapor sealant between the tops of the boards at all edges.

This is essential in areas of potentially high humidity. Order before 10am for next working day delivery. Celotx to product availability locally, and vehicle delivery slots.

Celotex TA These boards for single-ply flat roofing applications where the higher compressive strength is a pre-prop. Click for more information Celotex TC Ideal for built-up flat roofing applications, involving hot applied bituminous and mastic asphalt water-proofing systems. Click for more information Kingspan TR26 ThermaRoof foil faced insulation for celotez roofs with mechanically fixed single-ply waterproofing.

mm Celotex TD Flat Roof Insulation x - Insulation Cart

Click for more information Kingspan TR27 Glass tissue faced insulation for fully adhered single-ply, partially bonded built-up felt, mastic asphalt waterproofing. Click for more information. Product Installation Celotex Tempchek TD products should be installed in accordance with these instructions Ensure that joist spacing is celotxe no more than mm centers and that the dimension of the joist is sufficient to span and accept additional loads.

Stagger opposing fixings where two board edges share the same joist or noggin. Ensure that the plywood is completely celoted before any weathering system is applied. If the structure should be designed so that the finished roof has a continuous, smooth and even slope towards the rainwater outlet or gutter.

Vapor control layer Celotex TD has a built-in VCL due to the foil facers but this is discontinuous at the board joints.