How to Install a 12V Split Charge Relay

How to install EzzerMacs Kodi builds


Today I'm going to show you how to install the EzzerMacs builds on Kodi 18.5 Leia and lower versions including 17.6 Krypton. The screenshots in this guide are from Kodi on Windows 10. However, the instructions for installing these builds will also work on FireStick, Android phones, and any other device supported by Kodi.

With dozens of Kodi builds, EzzerMacs is one of the largest build libraries out there right now. It includes builds for Kodi Leia and Kodi Krypton. Whether you're looking for a small, lightweight build for low-spec media gadgets or powerful, fully-loaded builds for high-end devices, you can probably find them all here. EzzerMacs has also been added to our list of the best Kodi builds.

Let's start with the installation instructions.

Please click here to read our disclaimer before proceeding.


How to Install EzzerMacs Builds on Kodi

EzzerMacs has a huge catalog of Kodi builds for Leia and Krypton. This source also hosts two wizards with only a small difference in their spelling:

  • EzzerMac Assistant
  • EzzerMacS.magician

Both assistants host the same internal EzzerMacs Kodi builds. However, the EzzerMac wizard also provides access to builds from other wizards like Vodka and One Nation. EzzerMac also has a completely different interface. The user interface is more interactive and graphical. We'll look at it briefly later.

We will be installing the Art Nouveau build in this guide for the demonstrations. It's one of the internal builds from the EzzerMacs source.

Plutonium is also an EzzerMacs build. We covered installing Plutonium Kodi Build in a separate guide.

Let's start with the installation.

Attention: Kodi builds offer unlimited streaming content, but they can also get you into legal trouble. Kodi users need to use a VPN to hide their identity while streaming movies / TV shows / sports. In addition, many popular addons are geoblocked and require a VPN to work.

I personally use and recommendExpressVPN Which is the best VPN for Kodi. You can get 3 months free and save 49% on the annual plans.

Part 1- Allow unknown sources: We start by activating the unknown sources. It must be ensured that Kodi allows you to install third-party builds.

1) Launch Kodi on your device. When the home screen loads, click the settings

2) Click on System settings(or clicksystemon Kodi 18 Leia)

3) On the left you will see a sidebar with a few options. Choose Add-ons

4) You can see on the right Unknown sources. Enable this option if it is turned off

5) Ignore the warning message below and click Yes. Please rest assured that EzzerMac's Kodi builds are safe

Part 2- Install the EzzerMacs wizard repository: we will now install this repository from which we will install the EzzerMacs wizards later

1) Return to the Kodi app home screen. click the settings again

2) Click on File manager in the next window

3) Select and click Add source when you see this window

4) Now click where you see them in the following pop-up window

5) Use the on-screen keyboard and enter the following path in the empty field provided:

Enter this URL carefully. This is key to successfully installing the EzzerMacs Kodi builds.

click okay

6) Mark the marked field in this window Enter a name for this source and enter any name for the source. Make the name identifiable. I go with Ezzer


part 3- You added the source. We are now going to install the EzzerMacs Wizard repository onto Kodi from this source.

6) Return to the Kodi home screen and click on the left sidebar Add-ons

7) In the window that opens, navigate to the top left corner and click open box Symbol or popularly called Package installer

8) Select and open Install from zip file

9) Click on Ezzer (or any other name you added when you added the source in step 11)

10) Click on the zip file

11) Wait for the notification EzzerMacs Wizard Repository Add-on installed. It only takes a few seconds

Part 3 - Installing the EzzerMac Wizard: You have successfully installed the repository. Use this repo to install the wizard. Go to the last step (step 17).

12) Click on Install from the repository

13) Open EzzerMacs Wizard Repository

14) Click on Program add-ons

15) As you can see, there are two variants of the wizard. You can choose either. I'll discuss both in the next part.

16) Click on To install in the following window

17) Wait for the installation confirmation message to appear in the top right corner

18) A popup will appear with the developers' notes. click DismissorRemind me later (doesn't matter which one you click)

19) Click on Continue When you see the next pop-up (you can enable any settings you want before clicking Next).

20) Click on To ignore in this popup. We'll go to the build menu later

How to install this wizard. Now let's see what these wizards mean.

Install EzzerMacs Builds from the wizard

First, go to the Kodi home screen. From there you go to Add-Ons> Program Add-Ons

Depending on which wizard you have installed, follow the instructions below.

EzzerMacs Assistant

EzzerMacs is your regular assistant with the standard layout. You only have access to the EzzerMacs self-build for Leia and Krypton. How to use it:

1) Click on (EzzerMac) builds

2) Scroll down to Krypton is building Section and click Ezzer-Mac's Art Nouveau building.

I'm choosing this build for demonstration purposes only. You can choose any build. There are plenty of builds for Kodi 18 Leia as well.

3) Click on Reinstall (Recommended) Reinstalling will delete existing Kodi data and allow you to install the build on Kodi using the default settings.

4) Click on Continue to give Kodi permission to reset all data and reinstall the build

5) Wait for the build to be installed and downloaded

6) Click on Force close when the build is installed

Run Kodi again to use the build

EzzerMac Assistant

The graphical layout of the build makes the user interface more intuitive and takes the user experience to a whole new level. You can do pretty much anything on the same screen without scrolling through multiple windows.

1) This is the interface of the EzzerMac wizard

2) As is obvious, the list of builds can be found by clicking on Builds Top left tab. On the left is a list of all the builds, including the internal builds and those from other third-party sources.

3) To install any of the EzzerMacs Kodi builds, scroll down to EzzerMacs builds Click the build that you want to install. I have selected Build Art Nouveau

As with the previous wizard, this one also has multiple builds for Kodi 18 Leia.

4) As you can see, the wizard on the right shows Art Nouveau Build as the selected build. There are four options:

  1. Video preview: Before installing, let's preview the video of the build. Video preview may not be available for all builds
  2. To install: This is the default installation and will keep the Kodi data before installing the build (not recommended).
  3. Reinstall: Kodi will reset and all data will be erased before the build is installed
  4. Install themes: Installs the theme of the selected build only. Does not install any addons

5) Click on Reinstall

6) Click on Yes to confirm your intention that you want to rest Kodi and reinstall the build you selected

7) Wait for the build to download and install

8) Click on okay to force Kodi to close once the selected EzzerMacs Kodi build is installed

Art Nouveau Kodi Build: A Quick Look

Since we have chosen Art Nouveau for a demonstration, take a quick look at it. As the name suggests, the building's theme depicts modern art. Yeah, it looks a bit artistic. However, this doesn't necessarily make it useful. Also, this build is only available for Kodi 17.6. Most users have now switched to Kodi 18 Leia.

It took me at least 60 seconds to find out that the main menu item I selected is displayed at the top. The previous and next items are displayed in the lower left and lower right, respectively. I didn't quite understand why they should do this. That being said, I think the layout of the build is pretty normal. You can navigate to any item you want using the main menu and its submenus.

There aren't many addons to choose from. But the developers have certainly picked some of the best out there. You get DeathStar, Yoda, Man Cave, Sports Devil, The Magic Dragon, and a few more. These addons cover almost everything you want to see.

Before you start streaming with Kodi Addons / Builds, I want to warn you that whatever you stream on Kodi will be visible to your ISP and your government. This means that streaming copyrighted content (free movies, TV shows, sports) can cause you to run into legal problems.

Kodi users are strongly advised to establish a VPN connection while streaming. A VPN for Kodi bypasses ISP throttling, government surveillance, and geo-restriction on popular add-ons. I always connectExpressVPN on all of my streaming devices and I suggest you do the same.

ExpressVPN is the fastest, most secure VPN. It comes with a 30 day money back guarantee. That means you can use it freely for the first 30 days. If you are not satisfied with the performance (which is highly unlikely), you can request a full refund.

NOTE: We do not encourage violations of copyright laws. But what if you accidentally stream content from an illegitimate source? It is not always easy to tell the difference between a legitimate and an illegal source.

Before you start streaming on Kodi, here are three easy steps to learn how to get VPN protection.

Step 1: Get the ExpressVPN subscription HERE.

Step 2: click HERE to download and install the ExpressVPN app on your device.

Step 3: Click the power icon to connect to a VPN server. That's all. Your connection is now safe with the fastest and best VPN for Kodi.


EzzerMacs is probably the largest Kodi build repository I've seen in the recent past. It has dozen of its own builds. Using the EzzerMac wizard gives you access to many more builds from the other sources.

The Art Nouveau Kodi build I installed for the demonstration in this guide looks enjoyable. But like I said, it took me a while to get the hang of it. However, if you stay for a while, the build can grow on you. The addon list is compact but solid.

EzzerMacs has a slew of cool Kodi builds. It's worth a try.

Sorry! The author has not filled his profile.